(略)mmMS矫直精整机组变更公告
变更说明
主要技术参数由：(略)
发布日期：(略)
招标编号：(略)
招标编号（国际中国建设招标网）：(略)
上海宝华国际招标有限公司（以下称招标机构）受上海宝钢高强钢加工配送有限公司（以下称买方）委托，就其(略)mmMS矫直精整机组所需的下列货物进行公开招标，邀请合格投标人进行网上电子投标。
标段编号：(略)
标段名称：(略)
1．招标货物名称、数量、技术规格和资金来源：(略)
招标货物名称：(略)
数量：(略)
技术规格：(略)
1）原料规格：
材料品种：(略)
卷料厚度：(略)
卷料宽度：(略)
卷料重量：(略)
卷料内径：(略)
卷料外径：(略)
抗拉强度：(略)
2）成品规格
成品宽度：(略)
加工条数：(略)
切边量：(略)
成品最大卷重：(略)
成品板形（入、出口板形不平度）：(略)
3）机组速度：(略)
4）其他详见招标技术文件.
资金来源：(略)
2. 交货地点和交货时间：(略)
交货地点：(略)
交货时间：(略)
3. *凡确认投标的投标人请登录宝华智慧招标共享平台，务必在开标前注册为其会员并通过年检以获得投标资格，中标情况将在宝华智慧招标共享平台公示。
宝华智慧招标共享平台(https：(略)
4. 购买招标文件时间：(略)
5. 招标文件售价：(略)
2,(略).(略)元人民币或(略).(略)美元整。
招标文件均按标段进行计价出售，投标人成功购标后，自行下载招标文件和投标文件模板。招标文件一经售出不得退还。
6. 投标截止时间和开标时间：(略)
7. 开标方式：(略)
8. 开标地点：(略)
9. *对投标人的资格要求：(略)
1）未被国家企业信用信息公示系统(www.gsxt.gov.cn)列入严重违法失信企业名单;
2）未被“信用中国”网站(www.creditchina.gov.cn)列入失信被执行人名单;
3）不接受代理商投标；
4）投标人应具备精整重卷机组的成熟设计和供货业绩，并已正常投运；
5）矫直机的应用业绩要求：(略)
6）由于项目复杂、技术要求高，任何投标人希望参与本项目的，均应在开标前与招标人联系开展技术交流并签订技术协议(含矫直机设备的制造商及产地确认），未能签订技术协议的投标人，其投标将被否决，若签订的技术协议与招标文件有差异时，以招标文件为准。技术交流联系人：(略)
7) 投标人应承诺：(略)
(略). 本项目不接受联合体投标。
(略).招标人相关信息：(略)
招标人联系人：(略)
招标人邮箱：(略)
招标人电话：(略)
(略). 未领购招标文件的不得参加投标。
(略). 客服热线：(略)
传
真：(略)
网上购标方法：(略)
项目经理：(略)
电
话：(略)
电子邮件：(略)
业务咨询：(略)
招标机构地址：(略)
购标时人民币付款采用第三方支付，外币付款可以汇款到相应外币账户内
开户银行（外币）：(略)
收 款
人：(略)
账 号：(略)
美元：(略)
Swift
Code：(略)
(略)mm MS straightening and finishing unit
Change
the description
The main technical specificaiton is changed from “1) Specifications for raw material Category of material：(略)
Issue
Date：(略)
Tendering
No：(略)
Tendering No. (China International Bidding Website)
No：(略)
Shanghai Baohua International Tendering Co., Ltd.(Hereinafter
referred to as Tendering Agency) is commissioned by Shanghai Baosteel High Strength Steel Processing and Distribution Co., Ltd.(Hereinafter
referred to as tenderer) on Open Tendering for the following goods
required in (略)mm MS straightening and finishing unitinvites
eligible bidders to online e-bidding.
Bid section
No：(略)
Bid section
Name：(略)
1． The name,
quantity, technical specifications and fund sources of goods for
tendering：(略)
The
name：(略)
Quantity：(略)
Technical
specifications：(略)
1) Specifications for raw material
Category of material：(略)
Thickness of coil stock：(略)
Width of coil stock：(略)
Weight of coil stock：(略)
Inner diameter of coil stock：(略)
Outer diameter of coil stock：(略)
Tensile strength：(略)
2) Specifications for finished product
Width of finished product：(略)
The maximum straightening width is (略)mm; The maximum finishing width is (略)mm
Number of strips processed：(略)
Trimming volume：(略)
Maximum coil weight of finished product：(略)
Sheet shape of finished product：(略)
3) Speed of unit：(略)
4)Others：(略)
Fund
sources of goods：(略)
2. Delivery
time and place：(略)
Delivery
place：(略)
Delivery
time：(略)
3. *The
bidders who have confirmed to participate the bid must log on China
International Bidding Website (http：(略)
Baohua
E-bidding website (http：(略)
4. Time for
purchasing Tendering documents：(略)
5. Sales
prices of the tendering document：(略)
All
tendering documents will be sold per bid package (or section).
After purchasing the bid, the bidder can download the tendering
document and the template of bidding document. The tendering
documents sales are non-refundable.
(略)-(略)-(略) (略)：(略)
7. Bid
opening method ：(略)
8. E-bid
opening place：(略)
9. *Requirements
of Bidder’s qualification：(略)
1) Not included in the list of seriously illegal and trust-breaking enterprises by the National Enterprise Credit Information Publicity System (www.gsxt.gov.cn);
2) Not included in the list of persons subject to enforcement for trust-breaking by the website of "Credit China" (www.creditchina.gov.cn)；
3) No accept bids from agents;
4) The bidder shall have the mature design and supply performance of the finishing and recoiling unit, which has been put into normal operation.
5) The requirements for application performance of the straightener：(略)
6) ?Due to the complexity and high technical requirements of the project, any bidder intending to participate in the project shall contact the tenderer to conduct the technical exchanges and enter into the technical agreement before the bid opening ( including straightener manufacturer and origin confirmation). The bid submitted by the bidder who fails to enter into the technical agreement will be rejected. In case of any difference between the technical agreement so entered into and the tendering documents, the tendering documents shall prevail. Tendering contact：(略)
7）The bidder shall undertake that the construction and installation shall be carried out by the units with corresponding qualifications and capabilities
(略). This
project no consortium bidding is not accepted
(略).Information about the tenderer：(略)
Tenderer contact：(略)
Tenderer's mailbox：(略)
Tenderer telephone：(略)
(略). Tel：(略)
Fax：(略)
Online
tendering document purchase：(略)
Bid
manager：(略)
Tel：(略)
E-mail：(略)
Business
assistant：(略)
Tel：(略)
Bid
agency address：(略)
When purchasing the tendering document, the payment in RMB shall be made by
the third party, and the payment in foreign currency can be remitted to the corresponding foreign currency account.
Bank account（Foreign currency）：(略)
Beneficiary：(略)
Account
Number：(略)
USD：(略)
Swift
Code：(略)